Here is a simple trick to enhance your wifi signals...
This trick is best for those who's wifi device is installed in a corner of their house...
LETS START!!!
NOTE: THE EMPTY BODY SPRAY CYLINDER IS HIGHLY INFLAMMABLE AND CAN LEAVE SHARP CUTS ON HANDS WHILE CUTTING.
STEP 1:
YOU WILL REQUIRE AN EMPTY BODY SPRAY CAN OR YOU CAN USE ANY OTHER EMPTY CAN
STEP 2:
POKE A HOLE ANYWHERE IN THE CAN SO THE EXCESS AIR (PRESSURE) CAN ESCAPE OUT.
STEP 3:
SEPARATE THE TOP OF THE CAN AND CUT A STRAIGHT LINE FOLLOWING THE PATH SHOWN BELOW:
STEP 4:
CUT THE BOTTOM OF THE CAN BUT REMEMBER NOT TO SEPARATE IT COMPLETELY FROM THE BODY, AS SHOWN BELOW
STEP 5:
MAKE A HOLE LARGE ENOUGH FOR YOUR WIFI ANTENNA CAN PASS THROUGH IT.
STEP 6:
INSTALL YOUR WIFI SIGNAL BOOSTER ONTO YOUR WIFI ROUTER:
No comments:
Post a Comment